2012年9月5日星期三

2005 2006 2007 2008 2009 2010 Toyota Tacoma radio install

Toyota Tacoma 2005 2006 2007 2008 2009 2010 Stereo Ipod Installation Instructions


2010 Toyota Tacoma radio install

1.Gently insert a putty or butter knife below the AC knobs as shown.

We suggest using some masking tape or a towel to protect your dash from potential scratches.

2009 Toyota Tacoma radio install



2.As shown above, gently pry downward to remove the AC control panel.

2008 Toyota Tacoma radio install



3.AC Panel Removed.

You can leave it hanging or remove the connectors and remove out of the way.

If you will be performing a major stereo upgrade with amps, Ipod, Satellite etc, it would be a good idea to remove the AC controls.

2007 Toyota Tacoma radio install



4.If you purchased the dash kit from our website, a tool kit was provided.

Using the proper size socket, remove the 4 bolts under the stereo as shown.

2006 Toyota Tacoma radio install



5.If you purchased the dash kit from our website, a tool kit was provided.

Using the proper size socket, remove the 4 bolts under the stereo as shown.


2005 Toyota Tacoma radio install


6.As shown, pull the old head unit straight out and away from the dash.


Toyota Tacoma head unit install


7.Using 1 hand to hold the head unit, remove the plugs on the back of the stereo with the other.

They have a release tab that you need to push to release. No need to label as they are all different sizes.


how to install car stereo in toyota tacoma


8.To remove the antennae just gently pull straight out.


install toyota tacoma stereo


9.Head unit removed.

install car stereo in toyota tacoma


10.Head unit and wiring steps.

how to install a stereo in toyota tacoma


11.Locate the wire harness included with your stereo and the wire harness we included in your dash kit.

install car stereo


12.Match the colors on the two wire harnesses and twist them together as shown.

install car radio


13.Using the crimp caps and crimp tool provided (if dash kit purchased via our website), insert the wire into the cap and crimp as shown

install car head unit


14.Stereo harness connected to wire harness we provided.

install car gps


15.Plug stereo harness into the back of the head unit.

install car dvd


16.Assemble dash kit per instructions included. Use a piece of cardboard to protect the finish on your new dash kit.

2005 toyota tacoma


17.Ensure proper fit and look.

2006 toyota tacoma


18.Side view

2007 toyota tacoma


19.Front View

2008 toyota tacoma


20.Remove the hazard button and clock from old head unit. There are four tabs holding the this module.

2009 toyota tacoma


21.Ready for installation

2010 toyota tacoma


22.Plugged in the Ipod adapter for our head unit. The other end of the cable was dropped into the glove box.

car stereo installation guide


23.Match the plugs from your truck to the wire harness and simply plug them in.

car radio installation guide


24.Don't forget your antennae.

car dvd installation guide


25.Turn on the truck on and ensure your stereo and hazard lights work.

car gps installation guide


26.Locate the four screws from the old head unit.

car audio installation guide


27.Tighten the 4 screws as shown.

car navigation installation guide


28.Tighten the 4 screws as shown.

car head unit installation guide


29.Tighten the 4 screws as shown

how to install car gps in toyota tacoma


30.Re-connect the wires to your AC controls and ensure they are working.

how to install dvd player in toyota tacoma


31.Lift into place and push the controls back into the dash.

how to install navigation system in toyota tacoma


32. Congratulations, your new head unit is installed.

TOYOTA radio GPS Navigation
 

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale