2012年3月1日星期四

Instructions on mounting a Single Din car stereo into Space of a Double Din

Instructions on mounting a Single Din into Space of a Double Din car dvd navigation
DIN is short for Deutsche Industrie Norm, a unit which is used to measure car stereo head unit. We always refer to DIN as a single DIN, 180 by 50 millimeters in size, while a double DIN is 180 by 100 millimeters in size. Based on the make and model of the vehicle, different sizes can be used. As we can see, a single Din is smaller than a double Din, then a mounting bracket is needed fill the space in the console. You can pay less than $10 for the brackets.

We have compiled detailed Instructions on installing Single Din into Double Din to assist you in the removal of your car stereo.Here is The five Steps to show you How to Install Single Din into Double Din.

Step 1
Disconnect the car's battery. It is a vital step to avoid shorts.
Step 2
Take off the dash panel with a flathead screwdriver. Then you can have access to the radio..
Step 3
Unscrew the double DIN radio with either a wrench or the flat-head screwdriver. Take off the radio then disconnect the wires attached.
Step 4
Mount the single DIN head unit into the mounting bracket. As to the special bracket model, further specifications will be given by the instruction booklet.
Step 5
Connect the wiring harness to the new single DIN gps navigation. Mount the new head unit with mounting brackets into dashboard. Screw in the mounting bracket with the screws you have just removed from the factory radio. Mount back the dash panel.
Reconnect the car's battery, and turn on the vehicle and try if it can function normally.
Surely you will make it.

You May Also Like

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale