2012年3月1日星期四

How to Remove in-dash car Stereo from Chevy Step by Step


If you want to replace the oem car stereo in your Chevy, the first step you should consider is How to Remove Chevy Stereo. This may look like a daunting task at first glance, but in reality it's not hard to do if you follow these simple steps.
We have compiled detailed Chevrolet Car Stereo Removal Instructions to assist you in the removal of your car stereo. Each car stereo removal instruction features pictures and walk-through instructions to simplify the car stereo removal process.
Please select your vehicles make from the following:

How to Remove Chervolet Montana 01 Stereo

Chevrolet Montana 01

Step 1:  Unclip cupholder assembly.

Step 2:  Remove screws behind cupholder securing radio bezel.

Step 3:  Unclip radio bezel.


Step 4:  Remove 3 screws securing radio to bezel.

How to Remove Chevy Malibu 04-07 Stereo
Chevrolet Malibu 04-07


Step 1:  Remove screws securing drivers under dash panel.


Step 2:  Remove driver side dash panel. Remove screw securing under dash panel.

Step 3:  Unclip driver under dash panel.


Step 4:  Open glove box, remove screws securing glove box to vehicle.


Step 5:  Unclip glove box.

Step 6:  Unclip radio bezel and AC vents.


Step 7:   Remove screws securing radio to vehicle.

How to Remove Chevrolet Corvette 97-04 Stereo
Chevrolet Corvette 97-04


Step 1:  Remove ashtray


Step 2:  Remove screw behind ashtray.


Step 3:  Unclip plastic insert piece by ignition.  Remove screw.


Step 4:  Unclip passenger airbag light panel and remove plugs.


Step 5:  Lift center  compartment and remove screws.


Step 6:  Unclip radio trim bezel.


Step 7:   Once panel is removed, unplug cigarette lighter.


Step 8:  Remove screws on either side of radio.

How to Remove Chevy Corvette 90-96 Stereo

Step 1:  Open console, lift corners of the carpet and remove 2 7mm bolts from shift trim.
Step 2:  Remove 7mm bolt in front cupholder.
Step 3:  Pull back shift trim.
Step 4:  Remove 2 7mm screws at base of radio bezel.
Step 5:  Remove 2 screws in AC vents.
Step 6:  Remove airvent assembly.
Step 7:  Remove 2 7mm bolts holding top of radio bezel.
Step 8:  Remove 7 mm bolt securing side console.
Step 9:  Push out side console to expose right hand radio bolts.
Step 10:   Remove screws securing radio to vehicle.
Step 11: Unplug and ship
 Use extreme caution as some dash pieces may be fragile.
How to Remove Chevrolet Impala 00-05 Stereo

Step 1:  unclip side panel and remove 7mm bolt securing dash panel.
Step 2:  Remove drivers side dash panel and 7mm bolt securing dash panel.
Step 3:  Remove 7mm bolt above gauges.
Step 4:  Remove drivers under dash panel.
Step 5:  Remove 7mm bolt securing dash panel.
Step 6:  Unclip dash panel.
Step 7:  Remove 3 7mm bolts securing radio to vehicle.
How to Remove Chevrolet HHR 06-08 Stereo
Step 1:  Unclip bezel surrounds radio and AC controls.
Step 2:  Remove 4 screws securing AC controls
Step 3:  Remove 4 screws securing radio to vehicle.
How to Remove Chevrolet Corvette 05-10 Stereo
Step 1:  Unclip console trim panel.
Step 2:  Remove 2 7mm screws from console.
Step 3:  Unclip parking brake boot.
Step 4:  Remove console lid (4 Torx bolts)
Step 5:  Remove 2 7mm from passenger side panel, push panel to side.
Step 6:  Unclip trim panel surrounding radio and shifters.
Step 7:  Remove 6 7mm screws securing radio/AC controls and disconnect radio.
How to Remove Chevy Malibu 97-00 Stereo
Step 1: Unclip trim around radio and key.
Step 2: Remove screws holding radio to vehicle.

You May Also Like

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale