2012年3月24日星期六

how to install Mitsubishi Grandis gps dvd player

 Free Mitsubishi Grandis gps dvd player installation manual. Step by step car dvd gps installation guide with photos.this is a free and Save time way to teach you How to install a car dvd gps on  Mitsubishi Grandis.
1. Factory car sound effect diagram.


2. Use a special tool to prize up the gear cover along the right edge gap.


3. Put up the gear cover, and take it of housing.


4. Put a towel on the gear cover in case of destroying it.


5. Up-push the climate vent panel and take it out.


6. Be caution when pull out the climate panel because there are some cable connecting to the
back panel.


7. Remove the climate control cable.


8. Remove the power wires of the climate panel and take out the panel.


9. After removing the climate back board ,the factory unit is all in view clearly.


10. Remove the four corner's screws, pull the factory unit out.


11. Remove the factory car cable, and take the head unit out.


12. The view of the console board after removing the head unit and console panel.


13. Remove the screws of the head unit holder.


14. On both sides of stent.


15. Fetch the FLYAUDIO head unit.


16. Fit the factory holder to the FLYAUDIO is head units.


17. Connect the cables to the suitable position of the rear.


18. Put the unit back to the housing after connecting the cables.


19. Connect the GND and fix it.


20. Connect the climate control cable back to the climate panel.


21. Turn on the head unit and have a test, put the climate panel back to original place when test
is OK.


22. Put the gear cover back its place.


23.Coming up is the effect after upgrade.


You May Also Like

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale