2012年6月1日星期五

how to install car stereo on hyundai i30


Want to know how to install car stereo on hyundai i30 yourself? If you are looking forward to replacing the existing stereo in your Hyundai i30, removing it will require you to remove a considerable part of the dash, which is not very easy to do. But with the right kind of tools in hand, installing a new stereo is possible within an hour's duration.

Things you will need:

Screwdrivers
Wire harness adapter
Hyundai radio adaptor kit

the following is 37 steps that will show you how to install car stereo on hyundai i30 on your own.Step by step Mounting Instructions with photos.this is a free and Save time way to DIY car GPS installation.

in addiction,you may also interesting in the articel blow.we show them here to.

have fun!

You May Also Like:


step 1: the interior view of original hyundai i30 centre control


step 2:pry loose the panel on the right of the centre control with plastic knife.

step 3: pry loose the panel on the left of the centre control with plastic knife.
 
step 4:take out the centre control panel

step 5:pull out the connective wire behind the centre control panel.

step 6:dismantle the set screws above the a.c. with the screw driver.

step 7:dismantle the set screws under the a.c. with screw driver.

step 8:dismantle the set screws of the cd player.


step 9:take out the cd player from inside to outside gently.

step 10: pull out the connective wire behind the cd player.
 
step 11:the view agter dismantled the cd player and the panel.

step 12: switch out the buckle of the storage box and take it out by your hands.

step 13:pull out the set buckle on the bottom of the storage box, and take out the storage box by your hands.

step 14: pry out the decorative panel on the right of the dashboard by plastic knife.

step 15:lay out the gps antenna and the digital antenna as the picture shows.

step 17: lay out the dvd connective wires as the picture shows.
 
step 17: all the wires diagram of hyundai i30:connect both sides channels' audio out terminals of the signal wire with both sides channels' audio out terminals of the auv wire;connect the power tieline with the av power plug of the wire cable.

step 18:connect the power tieline plug seat with the original cd's connective wire plug.

step 19:connect the power tieline of signal wire with the av plug.

step 20:connect the aux wire with the signal wire's plug.

step 21:plgu the aux wire's plug in the aux port beside the cigarette lighter.

step 22:arrange all the cables of the hyundai i30's specialized car dvd gps player.

step 23: plug the connective plugs behind the original cd player.

step 24:install the original cd player and lock the set screw.

step 25:dismantle the set screws of the a.c. outlets by screw driver.

step 26:fasten the a.c. outlets on the dvd player's panel.

Hyundai i30 navi unit

step 28: twist the set screws on the a..c by your screw driver.
 
step 29:push the panel of hte dvd gps player to make sure it is on the right place.

step 30: find out the place to installthe dvd supporter inside the storage box to the left.

step 31:twist the set screws of the supporter(like the picture shows)

step 32: install the set buckle on the bottom of the storage box.

step 33:install the set buckle inside the storage box.

step 34: connect the dvd cables as the picture shows.

step 35:stick the dvd on the supporter.

step 36:install back the decorative panel on the right of the dashboard.
 
step 37: the view after installed the hyundai i30 dvd gps player.

2 评论:

i love music, that is why i've got some stereo in my car and i do have some CD's with me also..

car audio pittsburgh

Your blog provided us with valuable information to work with. Thanks a lot for sharing. Keep blogging.

soundboss car stereo player

Most popular post last week:

Car GPS Navigation Wholesale