2012年3月30日星期五

Free Chevy Corsica stereo radio 1991-1996 removal installation guide

So, if you've chosen to Remove Chevy corsica stereo radio 1991-1996 by yourselves and don't know where to begin. You're not alone…..

Step 1:
To remove the chevy corsica radio, the dash panel surrounding the radio and air conditioner controls must be removed. With your hands grab the top of the dash panel above the air vents and pull to unsnap the top of the dash panel. Continue to pull the dash panel unit the bottom of the panel unsnaps and completely separates from the body of the dash.

Step 2:
Once the dash panel pas been removed, the screws securing the radio can be seen. The radio is securing to the dash with a bracket attached to the bottom of the radio which is screwed into the dash with two 5.5mm/torx 15 bolt 15 bolt screws. Locate and remove both screws. Locate and remove both screws below the chevy corsica radio.

Step 3:
Pull the chevy corsica radio out or the dash. Unplug the black cable plugged into the rear of the radio. Unplug the plastic wire harness connector plugged into the rear of the radio. The chevy corsica stereo can now be completely removed from the dash.

You May Also Like

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale