2012年3月23日星期五

Free chevy beretta Radio Stereo Removal guide

Free chevy beretta Radio Stereo Removal guide. Step by step aftermarket car stereo removing Instructions with photos.this is a free and Save time way to teach you How to Remove chevy beretta Radio Stereo.

Step 1:
To remove the radio, the dash panel surrounding the radio and air conditioner controls must be removed. With your hands grab the top of the dash panel above the air vents and pull to unsnap the top of the dash panel. Continue to pull the dash panel until the bottom of the panel unsnaps and completely separates from the body of the dash.

Step 2:
Once the dash panel pas been removed, the screws securing the radio can be seen. The radio is secured to the dash with a bracket attached to the bottom of the raido which is screwed into the dash with (2) two 5.5mm/torx 15 bolt screws. Locate and remove both screws blow the radio.

Step 3:
Pull the radio out of the dash. Unplug the black cable plugged into the rear of the radio. Unplug the plastic wire harness connector plugged into the rear of the radio. The radio can now be completely removed from the dash.

You May Also Like 

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale