2012年3月22日星期四

free and Save time way on How to Remove Acura Integra Stereo Radio

Free Acura Integra Stereo Radio Removal guide. Step by step removing Instructions with photos.this is a free and Save time way to teach you How to Remove Acura Integra Stereo Radio.


Note :
To remove the Honda factory radio, two screws at the rear of the radio must be removed from underneath the radio which can be accessed from behind the radio.
The Honda radio is secured to the pocket below the radio and will pull out of the dash connected together as one unit.

Step 1:
Move to the passenger side of the vehicle. The screws that secure the radio/pocket assembly to the dash are at the rear of the radio. The only way to access these screws is to look up at the rear of the radio from the passenger side of the car. With an 8mm socket or Phillips screw, locate and remove the screws as can be seen in the photos shown in the NOTE to the left.

Step 2:
Once the screws at the rear of the radio/pocket assembly have removed, the radio can be pulled forward out of the dash.

Step 3:
Pull the radio out of the dash. Unplug the black cable plugged into the rear of the radio. Unplug the white plastic wire harness connector plugged into the rear of the radio.
You May Also Like

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale