2012年1月19日星期四

How to Remove and Install Car Stereo DVD GPS in Hyundai Elantra

Car Stereo Installation guide free
With the development of the electronic commerce, you can find that you can get access to a variety of GPS Navigations from the manufacturers, local markets, online stores and so on at a wide range of prices. However, it is well known that the in-dash Hyundai Elantra GPS Navigation is not easy to install since it is somewhat complicated. For some people, the structure of the car and the components are very unfamiliar to them. They may be at loss when it comes to install the GPS DVD Navigation for their own cars. We OemCarGps would like to help you in the mounting instructions. Please read the followings for reference.

29 Steps on How to Remove and Install  Car Stereo DVD GPS in Hyundai Elantra

Step 1:hyundai elantra original original dashboard view.

Step 2:pry out the original CD dashboard panel by plastic knife.

Step 3:dismantle the screws of original CD by screwdriver.


Step 4:pull out the connective wire behind the original CD.


 Step 5:dismantle the ste screws on the decorative panel above the CD.

Step 6:take out the decorative panel.



Step 7:the view after dismantled the original CD player and the decorative panel.


Step 8:pull out the buckle of the storage box as the arrow shows and take out the storage box.

Step 9:dismantle the storage box to lay out the GPS antenna,CMMB antenna and DVD connective wires.

Step 10:switch out the seal of column a.
 
Step 11:switch out the decorative panel of column a.

 Step 12:lay out the GPS antenna and CMMB antenna upper right of the dashboard.

 Step 13:put back the decorative panel and seal to column a.

 Step 14:lay out the external DVD's connective wire.


 Step 15:pull the DVD connective wire inside the storage box,fasten the DVD supporters inside the storage box and stick them to the bottom of the box .(note:drill the holes on the side of the storage box,and fasten the supporters with screws in the holes.)

 
 Step 16:install the storage box to the original place.

 Step 17:insert the screws of the storage box as the arrow shows.

 Step 18:power tieline distribution(note:connect AV-IN power A with AV power B in picture 21;connect AV-IN A port with tone filter in picture 20)


Step 19:AV-IN cables.


Step 20:input the AV audio-out to the tone filter as the picture shows.

 
 Step 21:power wire distribution.(connect the AV-IN A to the AV-OUT B in picture 18)


Step 22:arrange all the cables.

Step 23:input the cables to the corresponding interfaces behind the DVD GPS unit.

Step 24:fasten the dvd gps unit

Step 25:connect the original CD player wires.

 Step 26:put back the CD player to the original place and tight the set screws.

 Step 27:install the A.C. outlet panel and plug the emergency light switch.
 Step 28:push it gently to make sure the outlet panel to the original place.


Step 29:the view after installed the specialized Hyundai Elantra DVD GPS unit.

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale