2012年2月11日星期六

how to install a car stereo in a Honda CRV

Honda GPS Navigation
   Feeling boring on the long driving journey and extended wait, getting lost and confused in an unfamiliar territory? No doubt that the Honda CRV GPS  is the promise and ideal choice for the Honda CRV owners.then,if you have had a new car gps for it.you should spend some time to watch the following installation guide.

You May Also Like

18 steps on how to install a car stereo in a Honda CRV.

have fun!!!
 
1.  Use the method above to move back the gear, remove the panel.
(1). Open the plastic cover 
(2). Push down with nipper or the car key, then move back the gear.
 
2.  Open the decoration panel above the outlets.

3.  Remove the outlets.


4.  Lift one side of the panel, then the other side.


5.  Remove the 2 screws of the outlet.


6.  Remove the 2 screws beneath the headunit, then slide out the factory headunit.


7.  Factory headunit removed.


8.  Remove the mounting brackets from the factory headunit.


9.  Mount the mounting brackets onto the new headunti.


10. Definition of the plugs  


11.  Plug the power wires, steering wheel control harness and the radio wires etc coming with the headunit.


12. Remove the glove box, then put through the GPS aerial, USB wire, car reversing video cable and the car reversing control harness. 


13. Connect the car reversing video cable and the car reversing control harness.
 

14. Mount the new headunit, fix the screws.


15.  Plug the connectors and mount them in the right place.


16.  Mount back the outlets.


17. Mount back the decoration panel above the outlets.


18.   Replacement finished.

installation guides for more models visit:OemCarGPS Blog

0 评论:

Most popular post last week:

Car GPS Navigation Wholesale